Ford Fiesta MK7 Pre Facelift

Tidy up your engine bay with a Proform Engine Bay fuse box cover. Supplied a choice of finishes from smooth plastic which comes ready to be prepped and painted/hydrodipped. Along with OEM textured plastic for the factory look and carbon fibre effect plastic. These covers are now also available in coloured plastics. The covers have been manufactured from coloured material rather than prepped painted and lacquered. This saving in labour is reflected in the price but please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. If you would like a colour matched set, please view our painted/ hydrodipped dress up kits listed elsewhere on the site. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the fuse box cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print and will really make your engine bay stand apart from the rest.  Fits all Mk7/7.5  Fiesta variants (inc ST Line and ST180) Please note raw items (smooth for paint) may contain manufacturing marks which will easily be removed during the prepping process.

Read more less

Welcomed into our Enhanced Performance (By CEUK) Range is our all new Battery Tie Down! Machined from Billet Aluminium, the brace is designed to tightly and securely hold your battery in place - Replacing the old, nasty rusty looking brace and Enhancing the look of your engine bay! Featuring the Iconic EP Logo on the front, this is purely simplistic and modern!  Supplied with 2x Stainless Steel Marine grad chemical resistant replacement nuts! What's included? : 1x Battery Tie Down - Black 2x M6 Stainless Steel A4 Nuts Fitting Instructions Fits all MK7 Fiesta's Please note: On Some Models, The battery has a small plastic tab to the right hand side of the OEM tie down, this needs to be removed with a Stanley knife! Our instructions provide details on how this can be done and it is very simple! By ordering you agree to this!

Read more less

Have you always got loose change rattling around in your cup holder or on your dash? Look no further than our re-launched coin holder! Designed to fit neatly into one of your cup holders, this little pot will keep your change safe and together. Available in lots of combinations with or without gel badge logo - please select from drop down menu.  Lids with no badge will be 'domed'.  Lids with badge will be flat with badge recess. Please note this item has been designed to fit in the circular cup holders within the Fiesta MK7/8 models. There are many different models that this holder fits because Ford has used a universal part across a lot of its models.  We will be adding to this list but currently the tried and test models are: Mk2 Focus MK3 Focus Mk3.5 Focus (Although it will fit in the adjustable cup holder found in the MK3.5 Focus it may not be as secure and may obstruct the sliding 'door') Mk2 Puma Mk6 Fiesta MK7 Fiesta MK7.5 Fiesta Mk8 Fiesta Corsa E VXR

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk7/7.5 Fiesta models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Diesel Oil Cap Cover. This item fits over your existing cap. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk7 Fiesta and MK3 Focus models with diesel engines. This item will not fit the petrol variants. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform washer bottle bung in Gloss Plastic or Painted/Hydrodipped finish with ST / ST-Line or Washer Bottle Logo detail.   PLEASE ADD NOTE AT END OF CHECKOUT STATING WHICH LOGO YOU WOULD LIKE This item simply fits inside your washer bottle neck, replacing the existing cap. Please note that imperfections on the Gloss Plastic variant photos are in the plastic film and will not be visible on the parts themselves. Comes supplied with a gel badge of choice please select from dropdown boxes. Fits all MK7/ 7.5 Fiesta Models 2009-2018, including ST180. This item will not fit the US spec vehicles- the filler neck is a different size.

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

These badge plates are ideal for people who fancy making a subtle change to their engine cover or who have had a go at painting it themselves and need a finishing touch! Designed to fit neatly in the recess once the factory badge has been removed. Comes with adhesive tape applied to the rear. You will need to supply your own ST/ RS Logo.

Read more less

The rear of the Mk7 Fiesta engine bay has always been dominated with the tarnished metal work of the air conditioning system.  Paintmodz are pleased to be able to offer you a solution this unsightly problem. The rear A/C cover is a simple yet effective part which sits neatly over the pipe work, tidying up pipework and providing nice clean lines.  These covers are available in a range of finishes, including an assortment of coloured plastics. The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic, which is ready to be painted, and textured OEM plastic.  This cover comes complete with step by step instructions and a fitting kit. Please note this item is not suitable for Mk7.5 Fiesta Variants. Please note raw items (smooth for painting) may contain minor manufacturing marks which will are easily removed during the preparation process.

Read more less