Performance - RS3 8V

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less

WHY CHOOSE THE K-BRACE?   > The main role of bracing is to increase rigidity and stability of a vehicle by preventing body roll, therefore improving grip, steering feedback and response. The K-Brace is an adaption of a strut/tower brace, but provides the same solution with significant enhancements. HEIGHTENED PERFORMANCE  > With the 4 fixing points and making use of a triangulation design, the K-brace is able to produce an undoubted amount of support in comparison to that from a singular bar strut brace. UNIQUE DESIGN > Car Manufacturers often use additional strengthening supports to the strut mountings of a standard vehicle. Therefore, by utilising those supports, in conjunction with the design of the K-Brace we are able to reduce the structural flex of the body or chassis especially during cornering. INNOVATIVE SOLUTIONS > The K-Brace will always be mounted in the most optimum position in your vehicle, while taking into consideration usability of the standard car. Rear folding seats remain fully functional, while boot space is optimised without compromising performance. TAILORED PREFERENCE > The industrial standard powder coating we provide is second to none. With 6 colours to choose from we are giving you the option to choose your alternative. AUDI A3/S3/RS3 8V K-BRACE K-Brace can be installed using the Fitting aid Provided. Fits ALL AUDI A3 8V2013 - 2020 Available in Black-White-Grey-Red-Blue-Yellow or Unpainted International delivery available  21 Working Day lead time Quality guaranteed.    Please note;    REQUIRES MODIFICATIONS TO THE CARPET.   THE BRACE WILL LOOK TOO BIG FOR THE CAR UNTIL CARPET HAS BEEN TRIMMED OR REMOVED.  

Read more less

PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. OEM Part Number: 8N0804583 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING          Fits the following vehicles: Audi A3/S3 Mk1 8L (1996-2003) Audi A3/S3/RS3 Mk2 8P (2003-2012) Audi A3/S3/RS3 Mk3 8V (2013-) Audi TT Mk1 8N (1999-2006)  Audi TT/S/RS Mk2 8J (2007-2014)  Audi TT Mk3 8S (2014 on)  Audi Q2 (2017 on)  Audi Q3 (2012 - 2018)  Seat Toledo Mk2 1M (1999 - 2004)  Seat Toledo Mk3 5P (2004-2009)  Seat Alhambra Mk2 (2010 on)  Seat Leon Mk1 TYP 1M (1999-2005)  Seat Leon Mk2 1P (2005-2012)  Seat Leon Mk3 5F (2013 on)  Skoda Octavia Mk1 Typ 1U (1996-2004)  Skoda Octavia Mk2 1Z (2004-2012)  Skoda Octavia 5E (2012-2019)  Skoda Yeti 5L (2009-2017)  Skoda Superb B6 (2009-2011)  Skoda Superb 3V (2015 on)  Volkswagen New Beetle & Cabrio (1998-2011)  Volkswagen Beetle A5 (2011 on)  Volkswagen Bora (1999-2005)  Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010)  Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on)  Volkswagen Golf Mk4 1J (1997-2004)  Volkswagen Golf Mk5 1K (2004-2010)  Volkswagen Golf Plus 5M (2004-2010)  Volkswagen Golf Mk6 5K (2009-2012)  Volkswagen Golf Mk7 5G (2012-2020)  Volkswagen Jetta Mk5 1K (2005-2010)  Volkswagen Jetta Mk6 A6 (2011 on)  Volkswagen Passat B6 & B7 Typ3C (2006-2013)  Volkswagen Passat CC 35 (2008-2012)  Volkswagen Scirocco Mk3 (2008 - 2017)  Volkswagen Sharan Mk2 (2010 on)  Volkswagen Tiguan Mk1 (2007 - 2017)  Volkswagen Touran (2003-2015)  Volkswagen Touran (2017 on)  Volkswagen CC (2012 - 2017)  Volkswagen Eos (2006-2015)  

Read more less

PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Size 80mm Diameter Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price             Fits the following vehicles: Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 MK3 8V up to 125PS (2013-) Rear Beam, Audi A3/S3 MK3 8V 125PS plus (2013-) Multi Link, Audi RS3 (2015-), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD upto 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD, Volkswagen Golf MK7 GTE, Volkswagen Golf MK6 5K (2009-2012), Seat Leon Mk2 1P (2005-2012), Skoda OCTAVIA 5E 150PS PLUS MULTI-LINK, Skoda OCTAVIA 5E UP TO 150PS REAR BEAM, Skoda Octavia Mk2 1Z (2004-2012), Volkswagen Passat B6 & B7 Typ3C (2006-2012), Volkswagen Passat B8 (2015 on), Volkswagen Scirocco MK3 (2008 - 2017) , Seat Altea 5P (2004-), Skoda Superb (2009-2011)  

Read more less

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.  Now it is possibile to easily setup and maintain desired camber on your track car. For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS. Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing aliment Features:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in black What is included:– four inserts (this is a kit for one car) Used in  cars (type numbers in brackets): 2013 +  Audi A3/S3/RS3 (8V & 8VFL MQB) 2013 +  Audi A3 (8V & 8VFL MQB) 2015 +  Audi TT/ TTS /TTRS (8S MQB) 2013 + Volkswagen Golf/GTI (Mk7 MQB + Mk8) 2013 + Volkswagen Golf/GTI/R (MkVII MQB) 2012 + Seat Leon (5F MQB) 2017 + Audi Q2 (quattro) Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bush Note: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.

Read more less

Important Notes: 24mm - 2 Point Adjustable Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 2 point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort. WARRANTY: Backed by a 3 year warranty

Read more less

Important Notes: 26mm - 2 Point Adjustable Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 2 point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort. WARRANTY: Backed by a 3 year warranty

Read more less

AG MQB Lightweight Alloy Lower Front Control Arm Kit SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwanted flex.Exclusive to SuperPro, their alloy arms feature DuroBall rear bushings which are spherical joints embedded in the firm's unique Polyurethane for incredible control without introducing noise, vibration or harshness.These arms are the best upgrade available. Caster and camber increase gives more steering weight and feel as well as more fun.ALOY0018K offers a 38% weight saving over the OE arms, increased strength, increased caster, increased camber and much longer service life than the standard factory arms...and they look incredible too!SuperPro Tip:Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact.We also offer standard alignment steel front control arms (TRC1070-MOD) for the same MQB-chassis vehicles which, although they are heavier and don't feature caster increase bushes / anti-lift, they do have upgraded SuperPro bushes so will be a long-lasting simple upgrade. Kit Includes: 2 x Arms Shipping Weight: 7.7250kg Stock Details: Country of Origin: AUEAN: 9317745781158 Suitable for: Audi A3 MK3 8V1 3-Door Hatchback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8VA 5-Door Sportback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8V1 3-Door Hatchback quattro (2012 to 2020) Audi A3 MK3 8VA 5-Door Sportback quattro (2012 to 2020) Audi A3 MK3 8VS Saloon / Limousine Front Wheel Drive (2013 and later) Audi A3 MK3 8VS Saloon / Limousine quattro (2013 and later) Audi A3 MK3 8V7 Cabriolet Front Wheel Drive (2013 to 2019) Audi A3 MK3 8V7 Cabriolet quattro (2014 to 2019) Seat Leon MK3 Front Wheel Drive (2012 and later) Skoda Karoq NU7 Front Wheel Drive (2017 and later) Skoda Octavia MK3 All-wheel Drive (2012 and later) Skoda Octavia MK3 Front Wheel Drive (2012 to 2016) Volkswagen Caddy MK3 Typ 2K Second Facelift Front Wheel Drive (2015 to 2021) Volkswagen Golf MK7 4MOTION (2012 to 2019) Volkswagen Golf MK7 Front Wheel Drive (2012 to 2019) Volkswagen Golf MK8 Front Wheel Drive (2019 and later) Volkswagen Golf MK8 4MOTION (2020 and later) Volkswagen Golf Alltrack BA5 All-wheel Drive (2014 to 2020) Volkswagen Tiguan AD Front Wheel Drive (2016 and later) Volkswagen Tiguan AD 4MOTION (2016 to 2020) Volkswagen T-ROC A11 4MOTION (2017 and later) Volkswagen T-ROC A11 Front Wheel Drive (2017 and later)

Read more less

Want to sharpen up your Golf 7 & 7.5 / Audi A3, S3, RS3 / Leon / Octavia handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. What does it do? Modern cars like the MQB platform run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That’s why the Clubsport S Golf gets a factory rear brace. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. Compatibility Audi A3/S3/RS3 in 4 door Saloon/Sedan Models All Audi A3 8V – 4 door sedan All Audi S3 8V – 4 door sedan All Audi RS3 8V – 4 door sedan ONLY for the 4 door sedan models – No cutting or drilling is required for fitment, so this modification is completely reversible. Please note: this is different to the Audi A3/S3/RS3 3 and 5 door Sportback models (VWR8130S3). Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR8130S3-SEDAN

Read more less

034Motorsport's Dynamic+ Camster Mounts are engineered to significantly improve handling performance for Volkswagen and Audi MQB & MQB Evo vehicles. Designed as a true drop-in upgrade, the Dynamic+ Camster Mount Pair provides an additional 1.5 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. 034Motorsport Dynamic+ Camster Mounts also add 1.0 degree of additional caster to each of the front wheels to improve high speed stability and cornering ability. This addition of positive caster increases dynamic negative camber while cornering, maximizing the available grip when turning. Dynamic+ Camster Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camster Mounts deliver a perfect balance of performance, durability, and comfort. Most importantly, Dynamic+ Camster Mounts provide a fixed camber and caster increase without the cost, noise, and complexity of adjustable camber plates.   DYNAMIC+ CAMSTER MOUNT BENEFITS: Reengineered Suspension Geometry for Performance Driving Additional 1.5 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts) Additional 1.0 Degree of Caster at Each Front Wheel (Compared to Factory Strut Mounts) Significantly Enhanced Cornering Grip Improved Steering Feel & Handling Response Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks MORE CAMBER, MORE CASTER, MORE GRIP: Dynamic+ Camster Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camster Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation.These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camster Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.Dynamic+ Camster Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability. FEATURES & FITMENT: Features: Complete Drop-In Replacements for Factory Strut Mounts CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish Proprietary 75 Durometer Rubber Inner Pucks Durable, Rebuildable Design Sold in Pairs - New High-Grade Strut Mount Bolts Included

Read more less

Please note: All spring lowering amounts are measured off the Standard chassis, this would not include models such as sports, Sline and Msports for example which may come lower from factory, you will need to take that measurement off of our measurement to give you an approximate drop. PRO-KIT | Performance Springs World's leading Performance Suspension Spring System Engineered and tested to work perfectly with stock dampers First step towards a complete sport suspension system Lower center of gravity Lowering = Traction + Attraction Progressive spring design Performance handling The Eibach Pro-Kit is the perfect answer for most popular road vehicles. It's our legendary spring system that dramatically improves both a vehicle's performance and appearance. Pro-Kit lowers your car?s centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking. When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level. Lowers 30mm Front / 30mm rear!  

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less